Medion Erazer X6811 User Manual download pdf (Page 96)

Information about conformity

Safety Handling Components Aid

Appendix

Information about conformity

The device fulfils electromagnetic compatibility and electricity safety requirements.

Your device complies with the basic requirements and the relevant guidelines of the

2004/108/EU EMV Guidelines [electromagnetic compatibility] and the 2006/95/EU

Guideline for low voltage devices.

This device fulfils the basis requirements and the relevant regulation of the

Ecodesign Guideline 2009/125/EG (Commission Regulation 1275/2008).

ISO 13406-2 Class II

Active matrix LCDs (TFT) with a resolution of 1366 x 768 pixel, which are in turn

composed of three sub-pixels each (red, green, blue), contain about 3.1 million

addressable transistors. Because of this very high number of transistors and their

extremely complex production process occasionally defective or incorrectly

addressed pixels or sub-pixels may occur.

There have been several attempts in the past to define the acceptable number of

defective pixels. But this can be difficult and varies widely between different

manufacturers.

We, therefore, adhere to the clear and strict requirements of ISO 13406-2,

class II, for the warranty handling of all TFT display products. These requirements

are summarized below.

Within ISO-standard 13406-2 the general requirements regarding pixel defects are

defined. Pixel defects are classified into three failure types and four failure classes.

Each individual pixel is made up of three sub-pixels in the primary colours (red,

green, blue).

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 107 108

No comments

Medion Erazer X6811 User Manual Page 96